Yokohama Air Spring S-400-2R S400-2R AIRSUSTECH F-400-2 Style
Rubber Punch Air Suspension
Information
OE NO.: Yokohama Shock Absorbers S-400-2
Spring Material: Rubber
Spring Type: Air Spring
Size: 400-3
Warranty:12 months
Place of Origin: China
Yokohama air spring
For Yokohama from Japan
Yokohama air suspension
OEM Cross reference
AIRSUSTECH Part No.: F-400-2
YOKOHAMA S-400-2R
YOKOHAMA S 400 2R
YOKOHAMA S-400-2
YOKOHAMA S 400 2
YOKOHAMA S400-2
YOKOHAMA S 400 2
YOKOHAMA S400-2R
Specifications and Detailed Technical Parameters: F-400-2
Design Height: 102mm
Max. Height: 167mm
Min Height: 57mm
Maximum stroke(mm): ±45
Max diameter(mm) :460
Standard Height,Internal Pressure 0.49 M pa When The General Value
Effective Area (Cm2): 1260
Volume(L): 11.9
Load (KN):61.6
Dynamic Spring Parameters (N/mm): 1344
Natural Frequency (Hz): 2.3
Max inner preesure limited (Mpa): 0.69
Burst inner pressure (Mpa): 3.9-4.9
The self-sealing type has excellent durability due to less rubber
deformation during expansion and contraction.
| Maintenance is very simple | There are no frictional sliding parts, so lubricating oil is not
required. |
| Reduced installation height | Compared with other springs, the installation height can be reduced
and the stroke can be effectively increased |
| Obtain elastic and soft spring parameters | Large load and soft elasticity, excellent anti-vibration
performance. |
| The output of the bearing capacity is variable | By changing the internal pressure, the bearing capacity can be
changed in a wide range. |
| highly controllable | If used in combination with a height adjustment valve, it can
maintain a constant height for different loads. |
| Has a decaying effect | If used in combination with auxiliary air chamber and throttle
valve, excellent damping effect can be obtained, thereby reducing
the resonance amplitude. |
| easy to install | Simple structure, easy to install and dismantle |
Operation Precautions
1. For the stroke of the air spring, please refer to the range of
the common maximum stroke listed
2. If the air spring is used at a height higher than the maximum
height, it may cause the upper and lower plates and the air spring
to fall off, and the internal air will quickly leak out, causing
danger. Therefore, appropriate control measures must be taken
during use.
3. For the commonly used maximum internal pressure of air springs,
please refer to the listed internal pressure range. In order to
ensure durability, it is recommended to control the internal
pressure within 0.5MPA, but in the self-sealing type, if the
internal pressure is too low to ensure sealing, the internal
pressure should be kept above 0.1MPA.
Who are we
We are based in Guangzhou China, start from 2008,sell to Eastern
Europe,Northern Europe,Western Europe,Domestic Market,North
America,South America,Africa,Eastern Asia,Southeast Asia,Mid
East,Southern Europe,Oceania,Central America and other countries.
There are total about thousands of products model in our factory.
The related picture of F-400-2
