2B2500 Double Convoluted Car Modification Parts 1/2-14NPT Gas Filled Air Spring

Product No.:

2b2500 airbag/air spring
Refer airmaxx 2B2500 air ride
2500 lb air bags

Specifications and Detailed Technical Parameters: 2B2500 Double Convoluted

Production process of rubber air springs

Rubber air springs are the inevitable trend of today's automotive equipment development, matching and industrial equipment accessories. With the current development of the world's automobile industry in the direction of high speed, high performance, comfort, safety and reliability, and convenient maintenance, steel plates and gas springs have become more and more unsuitable for its development, while rubber air springs can well meet its needs. For example, in Europe, the penetration rate of rubber air springs has basically reached 70-80%. High-quality rubber air springs go through the following steps.

1. Rubber mixing
2. Cord calendering
1) Cord: nylon 6, 66, modified 66. Polyester cord (PET) cord has single strand, 2 strands, 3 strands. Normal, bold.
2) Equipment:
Four-roll calender calendering line,.
The calendering process is a process of using a calender to cover the surface of the textile with the compounded rubber, and penetrate into the inside of the fabric gap, so that the rubber and the textile are tightly combined to form a rubber cord.
There are three ways to hang fabrics:
a.-General glue calendering;
b. Pressure glue calendering;
c. Rubbing and calendering.
Process performance requirements of the calendering compound:
It should have suitable rollability, good fluidity, sufficient scorch resistance and low shrinkage. Appropriate wrapping properties: The rubber material can neither be taken off the roll nor stick to the roller on the calender roll, but it should be convenient for the calendering operation and easy to produce sheets; good fluidity: the rubber material can penetrate smoothly and evenly into the Between the cords; Sufficient scorch resistance: The rubber compound must be heat-smelted before calendering and subjected to multiple thin passes, and it is often carried out at a higher temperature (80-110°C) during calendering, so the rubber. There should be no scorch during the calendering process. Low shrinkage: The elastic deformation of the rubber should be reduced, so that the surface of the rubber curtain does not change much after calendering.
3. Film calendering
The film required for the production of air springs is generally calendered with a three-roll calender. The hot-melted rubber material is pressed into a sheet of a certain thickness by three rolls, and is cooled by a conveyor belt and rolled into a roll. The width of the film is generally in the rollers. The width of the upper cutting edge is fixed, and the edge is not cut during molding. .According to its own functional requirements, the air spring has better air tightness of the inner film,
Therefore, butyl rubber is used in the formulation design; while the outer layer film requires weather resistance and good fatigue resistance, and chlorine-J rubber is used in the formulation design.

The air spring related picture 2B2500

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.