16'' Diameter Pneumatic Bellows Actuators Contitech FD 816-30 DS Norgren M/31162 Double Convoluted Air Spring

Replace these air springs

AIRSUSTECH NO. 2B16X2

Contitech FD 816-30 DS

Contitech FD816-30 DS

Contitech FD816-30DS

Contitech FD 816-30 DS G 1/2

Contitech FD816-30DSG1/2

Contitech FD 816-30 1/2 M10

Contitech FD 816 30 1/2 M10

Contitech FD816-30 1/2 M10

Contitech FD816 30 1/2 M10

Also Known As: 68052

Norgren NO. M/31162

Norgren NO. M 31162

Norgren NO. M31162

Firestone W01 R58 4067

Firestone W01-R58-4067

Firestone W01R584067

Firestone WO1R584067

Firestone WO1 R58 4067

Firestone WO1-R58-4067

DUNLOP PNEURIDE 16''×2

DUNLOP SPRINGRIDE SP1557

PARKER 9109171

Specifications and Detailed Technical Parameters:AIRSUSTECH 2B12X2

Application

The rubber air spring as a shock absorbing base can effectively protect the high-precision machinery and equipment from being damaged during the transportation process, such as the transportation of cruise missiles and control launch systems. If the rubber air spring is used as a special tool for the support point, its light weight and convenient use can be used, which is conducive to the maintenance of suburban vehicles and machinery and equipment. Rubber air springs are also widely used in various mechanical equipment, vehicles and other industries.

The production of rubber shock absorbers needs to go through the following steps

1. Rubber refining

The preparation of rubber shock absorber compound is the same as that of ordinary rubber product compound. First, the raw rubber should be fully masticated to make it have suitable plasticity and uniformity. With the increase of mastication time, the rubber loss coefficient decreased and the dependence on the amplitude decreased. The key to kneading is to make the compounding agent disperse uniformly. If the rubber compound is mixed unevenly, the stiffness of the shock absorber will fluctuate, and the uneven hardness will cause stress concentration inside the rubber, thereby shortening the service life of the shock absorber.

2. Surface treatment and bonding of metal parts

Most rubber shock absorbers contain metal parts, and the surface of the metal parts must be treated before bonding with the rubber, otherwise the bonding strength will be affected. There are many surface treatment methods for metal parts, the most commonly used is sandblasting, then wash with solvent, and apply glue after drying. At present, the commonly used adhesive is chemlok, which has a very strong adhesive strength.​

3. Vulcanization

The commonly used vulcanization methods of rubber shock absorbers are molding vulcanization, mold transfer vulcanization and injection vulcanization. Note: The vulcanization time and temperature should be strictly controlled during vulcanization. Generally speaking, the degree of crosslinking of rubber increases with time, the modulus of rubber increases, and the consumption coefficient of rubber decreases. Therefore, the vulcanization of the rubber shock absorber should be sufficient. If the under-sulfur and over-sulfur are all, the performance of the finished product will be reduced.

The related picture of 2B16×2 pneumatic bellows actuators

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.