RR Load LS20 Industrial Air Springs 2 Concoluted Rubber Pneumatic
For Lifting Equipment
Cross Reference
RR Load LS20
Triangle 6325
Triangle 4504
Firestone W01-358-6926
Firestone WO13586926
Firestone WO1-358-6926
Firestone W013586926
FIRESTONE W01-358-6926
FIRESTONE WO13586926
FIRESTONE WO1-358-6926
FIRESTONE W013586926
Contitech FD 200-19 504
Contitech FD 200 19 504
Contitech FD200-19 504
Contitech FD200 19 504
Contitech FD20019 504
Contitech 161299
Specifications and Detailed Technical Parameters:AIRSUSTECH 2B6926
Nut/blind nut
Top plate screw (nut) teeth:2X3/8-16UNC
The screw center distance of the top cover plate: 89mm
Screw (nut) teeth of the bottom cover plate: 2X3/8-16UNC
The screw center distance of the bottom cover plate: 89 mm
Air hole/air inlet/air fittings
Air hole/air inlet: 1/4NPTF
The screw center distance between the air hole and the nut: 38mm
Cover plate
Top plate diameter: 160 mm
Diameter of the bottom cover: 160mm
Bell rubber bellows
Rubber bellows diameter: 224mm(MAX251)
The Maximum Height: 274mm
The Minimum Height: 95 mm
Bumper block/bumper block
With bumper block
Belt loop/Girdle hoop/Girdle ring
One piece of belt loop/girdle hoop/girdle ring
Min. pressure: 0bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 3.2kg
Vibration isloation-dynamic characteristic values
Design height H: recommended 220mm, minimum 205mm
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] |
| Force (Load) [KN] | 6.1 | 8.2 | 10.3 | 12.5 | 14.5 | 16.5 | 6.0 |
| Spring rate [N/cm] | 750 | 960 | 1110 | 1340 | 1510 | 1730 |
| Natural frequency [Hz] | 1.8 | 1.7 | 1.7 | 1.6 | 1.6 | 1.6 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] |
| Height H[mm] | 250 | 4.9 | 6.6 | 8.2 | 9.5 | 11.7 | 13.4 | 6.5 |
| 210 | 6.7 | 8.8 | 11.0 | 13.3 | 15.5 | 17.6 | 5.8 |
| 170 | 7.9 | 10.5 | 13.1 | 15.7 | 18.3 | 20.7 | 4.9 |
| 130 | 9.1 | 12.0 | 15.0 | 17.8 | 20.7 | 23.4 | 4.0 |
| 90 | 9.9 | 13.2 | 16.6 | 19.8 | 23.0 | 25.8 | 2.9 |
Application of Guomat rubber air spring in lifting equipment
The working principle of the air spring is to fill the retractable
airtight container with compressed air and use the spring of the
elastic effect of the air. Air springs are commonly known as
airbags, airbag cylinders, airbag cylinders, etc.
Traditional lifting equipment uses air cylinders or hydraulic
cylinders to lift objects, which requires a large installation
space, is difficult to manufacture, heavy in weight, prone to
leakage and inconvenient to maintain. After using the rubber air
spring as the lifting element of the lifting equipment, the
traditional shortcomings of the lifting equipment are overcome,
maintenance is not required, the service life is long, and the
operation and replacement are convenient. Therefore, rubber air
springs are gradually replacing cylinder products on lifting
equipment.
The related picture of 2B6926
